Project Description

Full resin Par56

  • 100% epoxy resin filled inside to prevent any water leak
  • Super slim design to save shipping volume
  • Acid-proof,alkali-proof and UV resistant
  • IP68 waterproof protection
  • Low voltage AC12V input to use underwater
Contact us to get Marcs full catalogue

Par56 & wall mounted resin filled pool light

Size:177.5X25mm (with small kits and clips to mounted into the PAR56 house)

Operating voltage: AC/DC 12V-24V

Power options: 18W | 24W | 35W | 42W (real power)

Size: Φ177.5mm / 6.90” * H25mm / 0.98”

IP rate: IP68

Beam angle: 120°for SMD.

Power cord length: 2m (cord length customizable)

Program: 7 set colours and 5 sequences

IP Rate: IP68

Material: PC

Color Temperature(K):3200K warm white,5500K white,6500K cold white

Colors: RGB | RGBW | WW | CW | R | B | G | Y

Wave length:R: 621-625nm/ G: 518-520nm/ B:464-467nm

Installation: Embedded & Surface mounted

Control Methods: wireless control

Life time:> 35000 hours

Operating Temperature(℃): -20 ~45℃


  1. Bright light,not dazzling,energy saving,low light decay.
  2. Long service life,a wide range of illumination.
  3. Vibrant color changing modes light up your pool.
  4. Widely used in Pools , Ponds, Spa, Fountains.
  5. Constant current output voltage ensures that the lamp is protected from unstable voltage damage,over electricity,electric surge and lightning strike
  6. CCC,VDE approved. Good conductivity.0.75mm2, 1.0mm2 , 1.5mm2 power wire to choose from.Mounting clips on the back,easy to wire and install.